If you need urgent consulting help click here

Waveshare Open103Z

Overview

The Waveshare Open103Z-64 is a development board equipped with STM32F103ZE MCU.

The Waveshare Open103Z provides the following hardware components:

The Waveshare Open103Z configuration supports the following hardware features:

Interface	Controller	Driver/Component
NVIC	on-chip	nested vectored interrupt controller
ADC	on-chip	adc
UART	on-chip	serial port
GPIO	on-chip	gpio
FLASH	on-chip	flash
SPI	on-chip	spi
I2C	on-chip	i2c
CAN	on-chip	can (disabled by default)
USB	on-chip	usb

Applications for the waveshare_open103z board configuration can be built and flashed in the usual way.

Build and flash applications as usual. Here is an example for the Hello World application.

# From the root of the zephyr repository
west build -b waveshare_open103z samples/hello_world
west flash

Debug applications as usual. Here is an example for the Hello World application.

# From the root of the zephyr repository
west build -b waveshare_open103z samples/hello_world
west debug