If you need urgent consulting help click here
Broadcom BCM958401M2
Overview
The Broadcom BCM958401M2 board utilizes the Valkyrie BCM58400 SoC to provide support for PCIe offload engine functionality.
Hardware
The BCM958401M2 is a PCIe card with the following physical features:
PCIe Gen3 interface
RS232 UART (optionally populated)
JTAG (optionally populated)
Supported Features
The Broadcom BCM958401M2 board configuration supports the following hardware features:
Interface |
Controller |
Driver/Component |
|---|---|---|
NVIC |
on-chip |
nested vectored interrupt controller |
UART |
on-chip |
serial port |
Other hardware features have not been enabled yet for this board.
The default configuration can be found in the defconfig file:
boards/arm/bcm958401m2/bcm958401m2_defconfig
Connections and IOs
Programming and Debugging
Flashing
The flash on board is not supported by Zephyr at this time. Board is booted over PCIe interface.
Debugging
The bcm958401m2 board includes pads for soldering a JTAG connector. Zephyr applications running on the M7 core can also be tested by observing UART console output.