If you need urgent consulting help click here
MS5837 Sensor Sample
Overview
This sample application retrieves the pressure and temperature from a MS5837 sensor every 10 seconds, and prints this information to the UART console.
Requirements
MS5837 sensor
Wiring
The nrf52840 Preview development kit should be connected as follows to the MS5837 sensor.
nrf52840
Pin
|
MS5837
Pin
|
|---|---|
P0.3 |
SCL |
P0.31 |
SDA |
Building and Running
Build this sample using the following commands:
west build -b nrf52840dk_nrf52840 samples/sensor/ms5837
See nRF52840 DK on how to flash the build.