If you need urgent consulting help click here

MIPI-DSI

API Reference

group mipi_dsi_interface

MIPI-DSI driver APIs.

MIPI-DSI DCS (Display Command Set)

MIPI_DCS_NOP

MIPI_DCS_SOFT_RESET

MIPI_DCS_GET_COMPRESSION_MODE

MIPI_DCS_GET_DISPLAY_ID

MIPI_DCS_GET_RED_CHANNEL

MIPI_DCS_GET_GREEN_CHANNEL

MIPI_DCS_GET_BLUE_CHANNEL

MIPI_DCS_GET_DISPLAY_STATUS

MIPI_DCS_GET_POWER_MODE

MIPI_DCS_GET_ADDRESS_MODE

MIPI_DCS_GET_PIXEL_FORMAT

MIPI_DCS_GET_DISPLAY_MODE

MIPI_DCS_GET_SIGNAL_MODE

MIPI_DCS_GET_DIAGNOSTIC_RESULT

MIPI_DCS_ENTER_SLEEP_MODE

MIPI_DCS_EXIT_SLEEP_MODE

MIPI_DCS_ENTER_PARTIAL_MODE

MIPI_DCS_ENTER_NORMAL_MODE

MIPI_DCS_EXIT_INVERT_MODE

MIPI_DCS_ENTER_INVERT_MODE

MIPI_DCS_SET_GAMMA_CURVE

MIPI_DCS_SET_DISPLAY_OFF

MIPI_DCS_SET_DISPLAY_ON

MIPI_DCS_SET_COLUMN_ADDRESS

MIPI_DCS_SET_PAGE_ADDRESS

MIPI_DCS_WRITE_MEMORY_START

MIPI_DCS_WRITE_LUT

MIPI_DCS_READ_MEMORY_START

MIPI_DCS_SET_PARTIAL_ROWS

MIPI_DCS_SET_PARTIAL_COLUMNS

MIPI_DCS_SET_SCROLL_AREA

MIPI_DCS_SET_TEAR_OFF

MIPI_DCS_SET_TEAR_ON

MIPI_DCS_SET_ADDRESS_MODE

MIPI_DCS_SET_SCROLL_START

MIPI_DCS_EXIT_IDLE_MODE

MIPI_DCS_ENTER_IDLE_MODE

MIPI_DCS_SET_PIXEL_FORMAT

MIPI_DCS_WRITE_MEMORY_CONTINUE

MIPI_DCS_SET_3D_CONTROL

MIPI_DCS_READ_MEMORY_CONTINUE

MIPI_DCS_GET_3D_CONTROL

MIPI_DCS_SET_VSYNC_TIMING

MIPI_DCS_SET_TEAR_SCANLINE

MIPI_DCS_GET_SCANLINE

MIPI_DCS_SET_DISPLAY_BRIGHTNESS

MIPI_DCS_GET_DISPLAY_BRIGHTNESS

MIPI_DCS_WRITE_CONTROL_DISPLAY

MIPI_DCS_GET_CONTROL_DISPLAY

MIPI_DCS_WRITE_POWER_SAVE

MIPI_DCS_GET_POWER_SAVE

MIPI_DCS_SET_CABC_MIN_BRIGHTNESS

MIPI_DCS_GET_CABC_MIN_BRIGHTNESS

MIPI_DCS_READ_DDB_START

MIPI_DCS_READ_DDB_CONTINUE

MIPI_DCS_PIXEL_FORMAT_24BIT

MIPI_DCS_PIXEL_FORMAT_18BIT

MIPI_DCS_PIXEL_FORMAT_16BIT

MIPI_DCS_PIXEL_FORMAT_12BIT

MIPI_DCS_PIXEL_FORMAT_8BIT

MIPI_DCS_PIXEL_FORMAT_3BIT

MIPI-DSI Address mode register fields.

MIPI_DCS_ADDRESS_MODE_MIRROR_Y

MIPI_DCS_ADDRESS_MODE_MIRROR_X

MIPI_DCS_ADDRESS_MODE_SWAP_XY

MIPI_DCS_ADDRESS_MODE_REFRESH_BT

MIPI_DCS_ADDRESS_MODE_BGR

MIPI_DCS_ADDRESS_MODE_LATCH_RL

MIPI_DCS_ADDRESS_MODE_FLIP_X

MIPI_DCS_ADDRESS_MODE_FLIP_Y

MIPI-DSI Processor-to-Peripheral transaction types.

MIPI_DSI_V_SYNC_START

MIPI_DSI_V_SYNC_END

MIPI_DSI_H_SYNC_START

MIPI_DSI_H_SYNC_END

MIPI_DSI_COLOR_MODE_OFF

MIPI_DSI_COLOR_MODE_ON

MIPI_DSI_SHUTDOWN_PERIPHERAL

MIPI_DSI_TURN_ON_PERIPHERAL

MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM

MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM

MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM

MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM

MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM

MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM

MIPI_DSI_DCS_SHORT_WRITE

MIPI_DSI_DCS_SHORT_WRITE_PARAM

MIPI_DSI_DCS_READ

MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE

MIPI_DSI_END_OF_TRANSMISSION

MIPI_DSI_NULL_PACKET

MIPI_DSI_BLANKING_PACKET

MIPI_DSI_GENERIC_LONG_WRITE

MIPI_DSI_DCS_LONG_WRITE

MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20

MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24

MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16

MIPI_DSI_PACKED_PIXEL_STREAM_30

MIPI_DSI_PACKED_PIXEL_STREAM_36

MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12

MIPI_DSI_PACKED_PIXEL_STREAM_16

MIPI_DSI_PACKED_PIXEL_STREAM_18

MIPI_DSI_PIXEL_STREAM_3BYTE_18

MIPI_DSI_PACKED_PIXEL_STREAM_24

MIPI-DSI Device mode flags.

MIPI_DSI_MODE_VIDEO: Video mode

MIPI_DSI_MODE_VIDEO_BURST: Video burst mode

MIPI_DSI_MODE_VIDEO_SYNC_PULSE: Video pulse mode

MIPI_DSI_MODE_VIDEO_AUTO_VERT: Enable auto vertical count mode

MIPI_DSI_MODE_VIDEO_HSE: Enable hsync-end packets in vsync-pulse and v-porch area

MIPI_DSI_MODE_VIDEO_HFP: Disable hfront-porch area

MIPI_DSI_MODE_VIDEO_HBP: Disable hback-porch area

MIPI_DSI_MODE_VIDEO_HSA: Disable hsync-active area

MIPI_DSI_MODE_VSYNC_FLUSH: Flush display FIFO on vsync pulse

MIPI_DSI_MODE_EOT_PACKET: Disable EoT packets in HS mode

MIPI_DSI_CLOCK_NON_CONTINUOUS: Device supports non-continuous clock behavior (DSI spec 5.6.1)

MIPI_DSI_MODE_LPM: Transmit data in low power

MIPI-DSI Pixel formats.

MIPI_DSI_PIXFMT_RGB888: RGB888 (24bpp).

MIPI_DSI_PIXFMT_RGB666: RGB666 (24bpp).

MIPI_DSI_PIXFMT_RGB666_PACKED: Packed RGB666 (18bpp).

MIPI_DSI_PIXFMT_RGB565: RGB565 (16bpp).

Functions

static inline int mipi_dsi_attach(const struct device *dev, uint8_t channel, const struct mipi_dsi_device *mdev)

Attach a new device to the MIPI-DSI bus.

Parameters

dev – MIPI-DSI host device.
channel – Device channel (VID).
mdev – MIPI-DSI device description.

Returns

0 on success, negative on error

static inline ssize_t mipi_dsi_transfer(const struct device *dev, uint8_t channel, struct mipi_dsi_msg *msg)

Transfer data to/from a device attached to the MIPI-DSI bus.

Parameters

dev – MIPI-DSI device.
channel – Device channel (VID).
msg – Message.

Returns

Size of the transferred data on success, negative on error.

ssize_t mipi_dsi_generic_read(const struct device *dev, uint8_t channel, const void *params, size_t nparams, void *buf, size_t len)

MIPI-DSI generic read.

Parameters

dev – MIPI-DSI host device.
channel – Device channel (VID).
params – Buffer containing request parameters.
nparams – Number of parameters.
buf – Buffer where read data will be stored.
len – Length of the reception buffer.

Returns

Size of the read data on success, negative on error.

ssize_t mipi_dsi_generic_write(const struct device *dev, uint8_t channel, const void *buf, size_t len)

MIPI-DSI generic write.

Parameters

dev – MIPI-DSI host device.
channel – Device channel (VID).
buf – Transmission buffer.
len – Length of the transmission buffer

Returns

Size of the written data on success, negative on error.

ssize_t mipi_dsi_dcs_read(const struct device *dev, uint8_t channel, uint8_t cmd, void *buf, size_t len)

MIPI-DSI DCS read.

Parameters

dev – MIPI-DSI host device.
channel – Device channel (VID).
cmd – DCS command.
buf – Buffer where read data will be stored.
len – Length of the reception buffer.

Returns

Size of the read data on success, negative on error.

ssize_t mipi_dsi_dcs_write(const struct device *dev, uint8_t channel, uint8_t cmd, const void *buf, size_t len)

MIPI-DSI DCS write.

Parameters

dev – MIPI-DSI host device.
channel – Device channel (VID).
cmd – DCS command.
buf – Transmission buffer.
len – Length of the transmission buffer

Returns

Size of the written data on success, negative on error.

struct mipi_dsi_timings

#include <mipi_dsi.h>

MIPI-DSI display timings.

Public Members

uint32_t hactive: Horizontal active video.

uint32_t hfp: Horizontal front porch.

uint32_t hbp: Horizontal back porch.

uint32_t hsync: Horizontal sync length.

uint32_t vactive: Vertical active video.

uint32_t vfp: Vertical front porch.

uint32_t vbp: Vertical back porch.

uint32_t vsync: Vertical sync length.

struct mipi_dsi_device

#include <mipi_dsi.h>

MIPI-DSI device.

Public Members

uint8_t data_lanes: Number of data lanes.

struct mipi_dsi_timings timings: Display timings.

uint32_t pixfmt: Pixel format.

uint32_t mode_flags: Mode flags.

struct mipi_dsi_msg

#include <mipi_dsi.h>

MIPI-DSI read/write message.

Public Members

uint8_t type: Payload data type.

uint16_t flags: Flags controlling message transmission.

uint8_t cmd: Command (only for DCS)

size_t tx_len: Transmission buffer length.

const void *tx_buf: Transmission buffer.

size_t rx_len: Reception buffer length.

void *rx_buf: Reception buffer.

struct mipi_dsi_driver_api: #include <mipi_dsi.h>

MIPI-DSI host driver API.