If you need urgent consulting help click here

RISCV64 Emulation (QEMU)

Overview

The RISCV64 QEMU board configuration is used to emulate the RISCV64 architecture.

Fig. 207 QEMU (Credit: qemu.org)

Get the Toolchain and QEMU

The minimum version of the Zephyr SDK tools with toolchain and QEMU support for the RISCV64 architecture is v0.10.2. Please see the installation instructions for more details.

Programming and Debugging

Applications for the qemu_riscv64 board configuration can be built and run in the usual way for emulated boards (see Building an Application and Run an Application for more details).

Flashing

While this board is emulated and you can’t “flash” it, you can use this configuration to run basic Zephyr applications and kernel tests in the QEMU emulated environment. For example, with the Synchronization Sample:

# From the root of the zephyr repository
west build -b qemu_riscv64 samples/synchronization
west build -t run

This will build an image with the synchronization sample app, boot it using QEMU, and display the following console output:

***** BOOTING ZEPHYR OS v1.8.99 - BUILD: Jun 27 2017 13:09:26 *****
threadA: Hello World from riscv64!
threadB: Hello World from riscv64!
threadA: Hello World from riscv64!
threadB: Hello World from riscv64!
threadA: Hello World from riscv64!
threadB: Hello World from riscv64!
threadA: Hello World from riscv64!
threadB: Hello World from riscv64!
threadA: Hello World from riscv64!
threadB: Hello World from riscv64!

Exit QEMU by pressing CTRL+A x.

Debugging

Refer to the detailed overview about Application Debugging.