If you need urgent consulting help click here

Bluetooth Audio Architecture

Bluetooth Audio Architecture

Fig. 26 Bluetooth Audio Architecture

Generic Audio Framework (GAF)

The Generic Audio Framework (GAF) is considered the middleware of the Bluetooth LE Audio architecture. The GAF contains the profiles and services that allows higher layer applications and profiles to set up streams, change volume, control media and telephony and more. The GAF builds on GATT, GAP and isochronous channels (ISO).

GAF uses GAP to connect, advertise and synchronize to other devices. GAF uses GATT to configure streams, associate streams with content (e.g. media or telephony), control volume and more. GAF uses ISO for the audio streams themselves, both as unicast (connected) audio streams or broadcast (unconnected) audio streams.

GAF mandates the use of the LC3 codec, but also supports other codecs.

Generic Audio Framework

Fig. 27 Generic Audio Framework

The top-level profiles TMAP and HAP are not part of the GAF, but rather provide top-level requirements for how to use the GAF.

GAF has been implemented in Zephyr with the following structure.

Generic Audio Framework

Fig. 28 Zephyr Generic Audio Framework

Currently CAP (and CAS) as well as CCP (and TBS) are not yet implemented in Zephyr. Similarly the top-level profiles TMAP and HAP are also not yet implemented.

Using the Bluetooth Audio Stack

To use any of the profiles in the Bluetooth Audio Stack, including the top-level profiles outside of GAF, CONFIG_BT_AUDIO shall be enabled. This Kconfig option allows the enabling of the individual profiles inside of the Bluetooth Audio Stack. Each profile can generally be enabled on its own, but enabling higher-layer profiles (such as CAP, TMAP and HAP) will typically require enabling some of the lower layer profiles.

It is, however, possible to create a device that uses e.g. only Stream Control (with just the BAP), without using any of the content control or rendering/capture control profiles, or vice versa. Using the higher layer profiles will however typically provide a better user experience and better interoperability with other devices.

Stream Control (BAP)

Stream control is implemented by the Basic Audio Profile. This profile defines multiple roles:

  • Unicast Client

  • Unicast Server

  • Broadcast Source

  • Broadcast Sink

  • Scan Delegator (not yet implemented)

  • Broadcast assistant (not yet implemented)

Each role can be enabled individually, and it is possible to support more than one role.

The API reference for stream control can be found in Bluetooth Audio.

Rendering and Capture Control

Rendering and capture control is implemented by the Volume Control Profile (VCP) and Microphone Input Control Profile (MICP).

The VCP implementation supports the following roles

  • Volume Control Service (VCS) Server

  • Volume Control Service (VCS) Client

The MICP implementation supports the following roles

  • Microphone Input Control Service (MICS) Server

  • Microphone Input Control Service (MICS) Client

The API reference for volume control can be found in Bluetooth Volume Control.

The API reference for microphone input control can be found in Bluetooth Microphone Control.

Content Control

Content control is implemented by the Call Control Profile (CCP) and Media Control Profile (MCP).

The CCP implementation is not yet implemented in Zephyr.

The MCP implementation supports the following roles

  • Media Control Service (MCS) Server via the Media Proxy module

  • Media Control Client (MCC)

The API reference for media control can be found in Bluetooth Media Control.

Coordinated Sets

Coordinated Sets is implemented by the Coordinated Sets Identification Profile (CSIP).

The CSIP implementation supports the following roles

  • Coordinated Set Identification Service (CSIS) Server

  • Coordinated Set Identification Service (CSIS) Client

The API reference for media control can be found in Bluetooth Coordinated Sets.