If you need urgent consulting help click here

ti,cc13xx-cc26xx-pinctrl

Vendor: Texas Instruments

Description

TI SimpleLink CC13xx / CC26xx pinctrl node.

Device pin configuration should be placed in the child nodes of this node.
Populate the 'pinmux' field with a pair consisting of a pin number and its IO
functions.

The node has the 'pinctrl' node label set in your SoC's devicetree,
so you can modify it like this:

  &pinctrl {
          /* your modifications go here */
  };

All device pin configurations should be placed in child nodes of the
'pinctrl' node, as in the i2c0 example shown at the end.

Here is a list of
supported standard pin properties:

- bias-disable: Disable pull-up/down.
- bias-pull-down: Enable pull-down resistor.
- bias-pull-up: Enable pull-up resistor.
- drive-open-drain: Output driver is open-drain.
- drive-open-drain: Output driver is open-source.
- input-enable: enable input.
- input-schmitt-enable: enable input schmitt circuit.

An example for CC13XX family, include the chip level pinctrl
DTSI file in the board level DTS:

  #include <dt-bindings/pinctrl/cc13xx_cc26xx-pinctrl.h>

We want to configure the I2C pins to open drain, with pullup enabled
and input enabled.

To change a pin's pinctrl default properties add a reference to the
pin in the board's DTS file and set the properties.

  &i2c0 {
    pinctrl-0 = <&i2c0_scl_default &i2c0_sda_default>;
    pinctrl-1 = <&i2c0_scl_sleep &i2c0_sda_sleep>;
    pinctrl-names = "default", "sleep";
  }

The i2c0_scl_default corresponds to the following in the board dts file:

  &pinctrl {
    i2c0_scl_default: i2c0_scl_default {
      pinmux = <4 IOC_PORT_MCU_I2C_MSSCL>;
      bias-pull-up;
      drive-open-drain;
      input-enable;
    };
  };

Properties

Top level properties

These property descriptions apply to “ti,cc13xx-cc26xx-pinctrl” nodes themselves. This page also describes child node properties in the following sections.

Node specific properties

Deprecated node specific properties

Base properties

Properties not inherited from the base binding file.

(None)

Deprecated properties not inherited from the base binding file.

(None)

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “ti,cc13xx-cc26xx-pinctrl” compatible.

Name

Type

Details

reg

array

 
register space

This property is required.

See Important properties for more information.

status

string

 
indicates the operational status of a device

Legal values: 'ok', 'okay', 'disabled', 'reserved', 'fail', 'fail-sss'

See Important properties for more information.

compatible

string-array

 
compatible strings

This property is required.

See Important properties for more information.

reg-names

string-array

 
name of each register space

interrupts

array

 
interrupts for device

See Important properties for more information.

interrupts-extended

compound

 
extended interrupt specifier for device

interrupt-names

string-array

 
name of each interrupt

interrupt-parent

phandle

 
phandle to interrupt controller node

label

string

 
Human readable string describing the device (used as device_get_binding() argument)

See Important properties for more information.

clocks

phandle-array

 
Clock gate information

clock-names

string-array

 
name of each clock

#address-cells

int

 
number of address cells in reg property

#size-cells

int

 
number of size cells in reg property

dmas

phandle-array

 
DMA channels specifiers

dma-names

string-array

 
Provided names of DMA channel specifiers

io-channels

phandle-array

 
IO channels specifiers

io-channel-names

string-array

 
Provided names of IO channel specifiers

mboxes

phandle-array

 
mailbox / IPM channels specifiers

mbox-names

string-array

 
Provided names of mailbox / IPM channel specifiers

wakeup-source

boolean

 
Property to identify that a device can be used as wake up source.

When this property is provided a specific flag is set into the
device that tells the system that the device is capable of
wake up the system.

Wake up capable devices are disabled (interruptions will not wake up
the system) by default but they can be enabled at runtime if necessary.

power-domain

phandle

 
Power domain the device belongs to.

The device will be notified when the power domain it belongs to is either
suspended or resumed.

Child node properties

Name

Type

Details

pinmux

array

 
CC13XX/CC26XX pin's configuration (IO pin, IO function).

This property is required.

bias-disable

boolean

 
disable any pin bias

bias-pull-up

boolean

 
enable pull-up resistor

bias-pull-down

boolean

 
enable pull-down resistor

drive-open-drain

boolean

 
drive with open drain (hardware AND)

drive-open-source

boolean

 
drive with open source (hardware OR)

input-enable

boolean

 
enable input on pin (no effect on output, such as enabling an input
buffer)

input-schmitt-enable

boolean

 
enable schmitt-trigger mode