If you need urgent consulting help click here

st,stm32f4-pll-clock

Vendor: STMicroelectronics

Description

STM32L4 Main PLL node binding:

Takes one of clk_hse or clk_hsi as input clock, with an
input frequency from 1 to 2 MHz. PLLM factor is used to set the input clock
in this acceptable range.

Up to 2 output clocks could be supported and for each output clock, the
frequency can be computed with the following formula:

  f(PLL_P) = f(VCO clock) / PLLP  --> PLLCLK (System Clock)
  f(PLL_Q) = f(VCO clock) / PLLQ  --> PLL48CLK (Optional)

    with f(VCO clock) = f(PLL clock input) × (PLLN / PLLM)

The PLL output frequency must not exceed 80 MHz.

Properties

Node specific properties

Deprecated node specific properties

Base properties

Properties not inherited from the base binding file.

Name	Type	Details
#clock-cells	int	Number of items to expect in a Clock specifier This property is required.
div-m	int	Division factor for the PLL input clock Valid range: 2 - 63 This property is required.
mul-n	int	Main PLL multiplication factor for VCO Valid range: 50 - 432 This property is required.
div-p	int	Main PLL division factor for PLLSAI2CLK This property is required. Legal values: 2, 4, 6, 8
div-q	int	Main PLL (PLL) division factor for USB OTG FS, SDMMC and random number generator clocks. Valid range: 2 - 15

Deprecated properties not inherited from the base binding file.

(None)

Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “st,stm32f4-pll-clock” compatible.

Name	Type	Details
clocks	phandle-array	Clock gate information This property is required.
status	string	indicates the operational status of a device Legal values: 'ok', 'okay', 'disabled', 'reserved', 'fail', 'fail-sss' See Important properties for more information.
compatible	string-array	compatible strings This property is required. See Important properties for more information.
reg	array	register space See Important properties for more information.
reg-names	string-array	name of each register space
interrupts	array	interrupts for device See Important properties for more information.
interrupts-extended	compound	extended interrupt specifier for device
interrupt-names	string-array	name of each interrupt
interrupt-parent	phandle	phandle to interrupt controller node
label	string	Human readable string describing the device (used as device_get_binding() argument) See Important properties for more information.
clock-names	string-array	name of each clock
#address-cells	int	number of address cells in reg property
#size-cells	int	number of size cells in reg property
dmas	phandle-array	DMA channels specifiers
dma-names	string-array	Provided names of DMA channel specifiers
io-channels	phandle-array	IO channels specifiers
io-channel-names	string-array	Provided names of IO channel specifiers
mboxes	phandle-array	mailbox / IPM channels specifiers
mbox-names	string-array	Provided names of mailbox / IPM channel specifiers
wakeup-source	boolean	Property to identify that a device can be used as wake up source. When this property is provided a specific flag is set into the device that tells the system that the device is capable of wake up the system. Wake up capable devices are disabled (interruptions will not wake up the system) by default but they can be enabled at runtime if necessary.
power-domain	phandle	Power domain the device belongs to. The device will be notified when the power domain it belongs to is either suspended or resumed.