If you need urgent consulting help click here

SSD1306 128x64(/32) pixels generic shield

Overview

This is a generic shield for 128x64(/32) pixel resolution OLED displays based on SSD1306 controller. These displays have an I2C interface and usually only four pins: GND, VCC, SCL and SDA. Display pins can be connected to the pin header of a board using jumper wires.

Current supported displays

Display	Controller / Driver	Shield Designation
No Name 128x64 pixel	SSD1306 / ssd1306	ssd1306_128x64
No Name 128x32 pixel	SSD1306 / ssd1306	ssd1306_128x32
No Name 128x64 pixel	SH1106 / ssd1306	sh1106_128x64

Requirements

This shield can only be used with a board which provides a configuration for Arduino connectors and defines a node alias for the I2C interface (see Shields for more details).

Programming

Set -DSHIELD=ssd1306_128x64 when you invoke west build. For example:

# From the root of the zephyr repository
west build -b frdm_k64f samples/subsys/display/lvgl -- -DSHIELD=ssd1306_128x64